P7 PRO Brass EDC Magnetic Fidget Ring with a 24-Position Layout and Engraved Designs
P7 PRO Brass EDC Magnetic Fidget Ring with a 24-Position Layout and Engraved Designs
Couldn't load pickup availability
P7 PRO Brass EDC Magnetic Fidget Ring with a 24-Position Layout and Engraved Designs
P7 PRO places a bearing-supported magnetic interaction inside an engraved brass ring body. The supplier describes a 24-position layout that can be turned one step at a time or in a continuous finger motion.
Choose the edition for its construction, not just its engraving. The fixed edition is not intended for disassembly. The removable edition permits changes to the movable-magnet configuration using the supplied tool set; the supplier requires magnet positions to be symmetrical and balanced.
Finger-spinner conversion is a separate setup for the removable edition: the supplier shows it with the movable magnets left out. This conversion is not a simultaneous magnetic-detent mode in an unchanged ring, and it is not assigned to the fixed edition.
Features
- Engraved brass body with script, geometric or ornamental motifs
- Supplier-described 24-position magnetic layout
- Removable edition with adjustable movable-magnet placement; symmetrical balance required
- Removable-edition ring-spinner conversion with the movable magnets removed
Specifications
- Supplier-listed body material: brass
- Both editions: supplier inner diameter 19 mm, outer diameter 26 mm, width 8 mm
- Supplier P7 PRO model-sheet weight: 12.5 g; separate weights for each edition are not listed
- Supplier bearing designation: non-standard; no bearing model number is specified
- Supplier default movable-magnet layout: removable edition, four N52 magnets; fixed edition, four N52 plus two N35 magnets
Configuration
Both edition lists name a vacuum-packed ring, a 65 cm stainless-steel necklace chain, a wiping cloth, a polishing stick and a ring box. The removable-edition list additionally names a three-piece disassembly tool set, ten N52 magnets and ten N35 magnets.
Options
- Fixed Edition — Heart Sutra
- Fixed Edition — Six-Character Mantra
- Fixed Edition — Eight Trigrams
- Fixed Edition — Nine-Character Mantra
- Fixed Edition — Mythical Beast Pattern
- Removable Edition — Heart Sutra
- Removable Edition — Six-Character Mantra
- Removable Edition — Eight Trigrams
- Removable Edition — Nine-Character Mantra
- Removable Edition — Mythical Beast Pattern
- Removable Edition — Scrolling-Vine Pattern
FAQ
Which edition allows magnet-layout changes?
Only the removable edition is described for those changes. Use its supplied tool guide and keep the magnet positions symmetrical and balanced.
What is required for the finger-spinner arrangement?
The removable-edition spinner arrangement leaves out the movable magnets. It is a converted setup, not the unchanged magnetic-detent arrangement.
Are both editions the same physical size?
The supplier states that both are 19 mm inside diameter, 26 mm outside diameter and 8 mm wide; the removable version adds two disassembly notches.
Does removable mean adjustable ring size?
No. The supplier describes a fixed ring size with a 19 mm inner diameter. Removability refers to the assembly, not ring-size adjustment.
What extra kit is listed for the removable edition?
Its list adds a three-piece disassembly tool set and ten magnets each of the supplier-labeled N52 and N35 grades.
